EMC 1.8T 10K SAS 2.5 12Gb Unity Storage Hard Drive Part #(s): 005053154,005053155,005053362,005053365
- Brand: EMC
- Part #: 005053154,005053155,005053362,005053365
- Model: D4-2S10-1800
- :: Type: EMC storage drives
- :: Description: D4-2S10-1800 EMC Unity 1.8TB 12GB SAS 10K HDD for 25X2.5inch Enclosures
- :: Capacity: 1.8TB
- :: Model: Storage Server
- :: Interface Type: SAS
- :: Form Factor: 2.5inch
- :: Speed: 10000RPM
- :: Cache: 128M
- :: UNITY XT380F
- :: UNITY XT480F
- :: UNITY XT550F
- :: UNITY XT680F
- :: UNITY D4123F
- Condition: New
- Warranty: 1 (one) year Tekmart Africa warranty
Key points to note on Dell EMC Unity XT storage systems where these 1.8TB 2.5inch SAS drives are used:-
To function properly drives installed in a Dell EMC Unity XT storage system require that the array be running the minimum required revision of the Operating Environment (OE).
Dell EMC Unity & Unity XT storage systems use their own unique drive part numbersand ordering models. Moving or using Unity DAE’s and drives in Unity XT arrays is not supported at this time.
All Flash models support Flash drives, while Hybrid Dell Unity models support Flash, SAS, and NL-SAS drives. All drives operate at 12Gb/s speeds. SAS and NL-SAS drives utilize a 4KB drive formatting size, while Flash drives utilize a 520-byte block size.
1: The drive part number (PN) appears on a label on the front of the drive carrier. Note that although the OE GUI may display an alpha suffix at the end of the PN (like EFD) these characters are not part of the actual orderable PN.
2: All drives listed in this document are RoHS compliant.
3: Unity drive models use the following prefixes
• D3 = AC storage
• D3FC = AC FAST cache
• D3AF = AC storage when used in All-Flash-Array (AFA)
• D3N = DC NEBS storage
• D3NFC = DC NEBS FAST Cache
Figure 1: Unity Spinning Drives drive matrix with Minimum OE Revision