TP-LINK AC Power Adapters
TP-Link manufactures a vast array of networking devices, including routers, switches, access points, smart home devices, and more. Each type of device, and often different models within a category, will have specific power requirements. **Output Voltage (DC Power to the Device):** This is where the voltages vary significantly, as it depends on the specific power requirements of the device itself. Common DC output voltages for TP-Link devices include: - **::5V DC:** Often found on smaller devices like USB Wi-Fi adapters (though these are usually powered directly by USB), some basic network switches, or very compact smart home devices. - **::9V DC:** Very common for many TP-Link routers (especially older or entry-level models), Wi-Fi extenders, and some IP cameras (e.g., Tapo C200/C210/C220). You'll often see these with current ratings like 0.6A, 1A, or sometimes higher. - **::12V DC:** Another very common voltage for a wide range of TP-Link routers (especially mid-range to high-end Archer series), some switches, and many larger or more powerful networking devices. Current ratings can vary widely, from 0.5A to 2.5A or even higher for more demanding devices. - **::48V DC:** This is the standard voltage for **IEEE 802.3af/at/bt Power over Ethernet (PoE)** devices. If a TP-Link device (like a PoE switch, an Omada EAP access point, or a PoE-powered IP camera) is designed to be powered via an Ethernet cable using a standard PoE injector or switch, it will typically use 48V DC (though the exact range can be 44-57V DC, depending on the PoE standard). - **::24V DC:** Less common than 48V for standard PoE, but **24V Passive PoE** is used by some TP-Link outdoor CPEs (Customer Premises Equipment) and older access points. This is not IEEE standard PoE and requires a specific 24V passive PoE injector. Great practice is to ***always use the power adapter that came with your TP-Link device, or a certified replacement with the exact same output voltage (V) and at least the same
