Dell EMC 20cm (0.2M) R740 R740xd Backplane signal cable 2x 16pin DPN: 09NG3V,9NG3V
- Brand:Dell
- Part #: 09NG3V,9NG3V
- Specs:-
- :: Type: Internal server cables
- :: Description:Signal Cable
- :: Length:20cm
- :: Interfaces:16pin to 16pin
- Compatibility:
- :: Dell EMC R740 servers
- :: Dell EMC R740xd servers
- Condition: Refurbished
- Warranty: 1 (one) year Tekmart Africa warranty
-
Key points to note on these 09NG3V Dell signal cables:-
These are used for signaling information about your storage and connects between the system board and the hard drives backplane. When left unresolved, you may lose information about the storage and the backplane itself.
The signal cable used depends on the backplane configuration which determines the total number of hard drives that can be installed with optional PCIe SSDs.
This is a sample Dell Cable routing guide and is not specific to a particular server model.
Figure 1. Cable routing – 8 x 2.5 inch drive backplane with mini PERC
- backplane
- backplane power cable (BP: BP1 to MB: BP1 )
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- system board
- mini PERC
- SAS cable (BP: BP SAS A, BP SAS B to adapter PERC)
Figure 2. Cable routing – 8 x 2.5 inch drive backplane with adapter PERC
- backplane
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- backplane power cable (BP: BP1 to MB: BP1)
- system board
- adapter PERC
- SAS cable (BP: BP SAS A, BP SAS B to MB: RISER 2)
Figure 3. Cable routing – 8 x 3.5 inch drive backplane with on board SATA
- backplane
- backplane power cable (BP: BP1 to MB: BP1)
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- system board
- SATA B cable (BP: BP SAS B to MB: J_BP_SIG1)
- SATA A cable (BP: BP SAS A to MB: BP 12C RVYPM)
Figure 4. Cable routing – 8 x 3.5 inch drive backplane with mini PERC
- backplane
- backplane power cable (BP: BP to MB: BP1)
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- system board
- mini PERC
- SAS cable (BP: BP SAS A0, BP SAS B0 to MB: J_STORAGE1)
Figure 5. Cable routing – 8 x 3.5 inch drive backplane with adapter PERC
- backplane
- backplane power cable (BP: BP1 to MB: BP1)
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- system board
- adapter PERC
- SAS A cable (BP: BP SAS A0 to MB: J_BP_PWR_A1)
- SAS B cable (BP: BP SAS B0 to MB: J_BP_SIG1)
Figure 6. Cable routing – 16 x 2.5 inch drive backplane with mini PERC
- backplane
- backplane expander
- backplane power cable (BP: BP1 to MB: BP1)
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- system board
- mini PERC
- SAS cable (BP: BP SAS A0, BP SAS BO to MB: J_STORAGE1)
Figure 7. Cable routing – 16 x 2.5 inch drive backplane with adapter PERC
- backplane
- backplane expander
- backplane power cable (BP: BP1 to MB: BP1)
- backplane signal cable (BP: BPSIG1 to MB: BPSIG1)
- system board
- adapter PERC
- SAS cable (BP: J_SAS_BO, J_SAS_A0 to MB: J_STORAGE1)
NOTE Internal cable connectors are not hot pluggable.
English