Chassis 6000Watt AC Power Supply for the Cisco Catalyst 6500 Series Chassis Part #: WS-CAC-6000W
- Brand: Cisco
- Part #: WS-CAC-6000W
- Specs:
- :: Type: Cisco Chassis AC Power Supplies
- :: Description: Cisco 6000W AC Power Supply for Catalyst 6500 series switch chassis
- :: Fan Tray Required: High-speed fan
- LED Indicators:
- :: 2 green "INPUT OK," illuminate when input voltage is 85 VAC or greater
- :: 1 green "FAN OK," illuminates when the power supply fan is operating
- :: 1 red "OUTPUT FAIL," normally is off but illuminates when power supply outputs are out of regulation limits
- Chassis Power Specs:
- :: Input-voltage range and frequency: 100-240 VAC, 47-63 Hz
- :: Input current (each input): 16A
- :: Input-frequency range, output power:
- :: 6000W if both inputs are 220 VAC
- :: 2900W if both inputs are active but at least 1 is at 110 VAC or a single input is active and at 220 VAC
- :: Output holdup time :20 ms minimum
- :: Power-supply input receptacles: IEC 320-C19
- :: Power cord rating: 16A
- Chassis Compatibility:
- :: Cisco Catalyst 6506
- :: Catalyst 6506-E
- :: Catalyst 6509
- :: Catalyst 6509-E
- :: Catalyst 6509-NEB
- :: Catalyst 6509-NEB-A
- :: Catalyst 6513
- :: Cisco OSR-7609, 7609, and 7613 chassis
- Condition: Certified Cisco re-new spare part
- Warranty: 1 (one) year Tekmart Africa warranty
-
Key points to note on these WS-CAC-6000W Cisco 6000W AC Power Supplies:-
While many AC power modules produce 2500 - 4000 watts of AC power, these WS-CAC-6000W provide a higher wattage power supply which will be able to support future Cisco PoE devices.
The 6000W power supply for the Cisco ® Catalyst ® 6500 Series chassis (Figure 1) below is a dual AC input power supply. When both inputs are at high line (220 VAC nominal voltage) then the output is 6000W.
When both inputs are active but at least one is operating at low line (110 VAC nominal voltage), or a single input is active and running from a high line (220 VAC nominal voltage) source, the unit is capable of providing 2900W output power. (The power supply will not power up with 110V single input.)
All Cisco Catalyst 6500 Series chassis hold up to two load-sharing, fault-tolerant, hot-swappable power supplies. Only one supply is required to operate a fully loaded chassis. If a second supply is installed, it operates in a load-sharing capacity.
The power supplies are hot-swappable-a failed power supply can be removed without powering off the system.
Figure 1. Cisco Catalyst 6500 Series Chassis AC power supply
The 6000W power supply offer the following features:
- :: Universal input (100-240 VAC, 50-60 Hz).
- :: Compatible with full output in Cisco Catalyst 6506-E, Catalyst 6509-E, and Catalyst 6513 switches. Works in Catalyst 6506 and Catalyst 6509 with a maximum output of 4000W.
- :: Redundant and hot swappable.
The Cisco Catalyst 6506-E, Catalyst 6509-E, and Catalyst 6513 chassis will have a full 6000W output with the power supply. The Catalyst 6506 and 6509 chassis will support a maximum of 4000W. The 6000W power supply will operate in both 110V and 220V mode.
IST: 030624038
English