877699-001 HPE 240GB SSD boot drive for 3PAR 20000,9000
Call for price
This item is priced on request. Get in touch and we'll send you a quote.
Ask for a price Call 0861 711 712Intel DC S4500 Series 240GB 2.5in 6Gb/s SATA SSD Part #: 877699-001 / 869575-001 / SSDSC2KB240G7P,MTFDDAK240TCB-1AR16ABYY
- Brand: Intel
- Part #: 877699-001,876596-001,5697-3291
- Alt. Part #: 869575-001
- Model #: SSDSC2KB240G7P
- Model #: MTFDDAK240TCB-1AR16ABYY
- SA: J66763-001
- Series: DC S4500
- Specs:-
- :: Capacity: 250GB
- :: Interface: SATA
- :: Data Transfer Rate: 6GBps
- :: Form Factor: 2.5in
- :: Operating Voltage: +5V / +12V
- :: Operating Amperage: 0.7A
- :: Condition: New
- :: Compatibility:
- :: H3C Converged Fabric 22000 Storage
- :: H3C Converged Fabric 9900 Storage
- :: HPE 3PAR StoreServ 9000 Storage
- :: HPE 3PAR 9450 4-node Storage Base with All-inclusive Single-system Software
- :: MPN: 877699-001
- Warranty: 1 (one) year Tekmart Africa warranty
Key points to note on these 877699-001 HPE 3PAR boot drives:-
These are the 240GB solid state hard drive (SSD) boot drive (SATA interface, 2.5-inch small form factor (SFF) for 3PAR systems drive model MTFDDAK240TCB-1AR16ABYY for exclusive use with 3PAR 20000,9000. Both boot drives in node must be same manufacture date.
The HPE 3PAR StoreServ 9000 and 20000 contain two, mirrored boot drives and the controller nodes do not support mixed boot drive models. This may require replacing both boot drives if the boot drive in the controller node fails. The HPE 3PAR StoreServ 8000 does not mirror the boot disk and therefore is not subject to this limitation.
Controller node boot drives for the HPE 3PAR StoreServ 8000 Storage, HPE 3PAR StoreServ 9000 Storage, and HPE 3PAR StoreServ 20000 Storage are being discontinued and transitioning to alternate spare part numbers as listed in the table below:-
Original Boot Drive Spare PartOriginal Spare Part DescriptionAlternate Boot Drive Spare PartAlternate Spare Part DescriptionStoreServ System Model809813-001SPS-NODE BOOT DRIVE 128GB SATA M.2 SDX300P31515-001DRV, BOOT, SS, 240G, SATA, M.2 MC5300 TCG8000782407-001SPS-Node Drive; 256GB; StoreServ 9450 and 20800P31514-001DRV, BOOT, SS, 480G, SATA, 2.5, MC5300 TCG9450, 20800782409-001SPS-Node Drive; 512GB; StoreServ 20x40 and 20x50P31514-001DRV, BOOT, SS, 480G, SATA, 2.5, MC5300 TCG20450, 20840 (and R2), 20850 (and R2)877698-001SPS-NODE BOOT DRIVE; 240GB; SATA; M.2; MC5100 SS8KP31515-001DRV, BOOT, SS, 240G, SATA, M.2 MC5300 TCG8000877699-001SPS-Node DRIVE; 240GB; SATA; 2.5 in; MC5100P31514-001DRV, BOOT, SS, 480G, SATA, 2.5, MC5300 TCG9450, 20800877700-001SPS-Node DRIVE; 480GB; SATA; 2.5 in; MC5100P31514-001DRV, BOOT, SS, 480G, SATA, 2.5, MC5300 TCG 20450, 20840 (and R2),
20850 (and R2)
Installing an online OS update is not possible if a node is in an offline, failed state.
Therefore, it is strongly recommended to proactively update the systems, if needed, within the transition period. The majority of HPE 3PAR StoreServ systems will require at most an HPE 3PAR StoreServ OS patch to accept the alternate boot drive. This is a one-time operation that is done online and will not impact the use or performance of the array.
- :: HPE 3PAR StoreServ 8000 and 9000 systems support the option of customers performing OS updates.
- :: HPE 3PAR StoreServ 20000 systems do not support the customer performing OS updates.
A minimum HPE 3PAR StoreServ OS requirement must be met to use the new, alternate spare part numbers..
The minimum OS requirements are:
- :: 3.2.2-MU2+P71
- :: 3.2.2-MU3+P70
- :: 3.2.2-MU4+P59
- :: 3.2.2-MU6 or later (no patches required)
- :: Any 3.3.1 version (no patches required)
Patch numbers listed above may become obsolete by one or more subsequent patches. If so, HPE recommends installing the highest patch number in the chain of obsoleting patches.
***PSS: These are 3PAR Boot Drives and as Such Can only be used in 3PAR systems as Controller Boot Drives
INST: 240110001Eligible for immediate collection / shipping upon order confirmation
- Free collection from our store
- Secure checkout

