EMC SPS Replacement Battery Part # (s): 100809008 / 078-000-033 / 071-000-460 for CX3-80 Systems

• Brand: EMC
• Part #(s): 100809008 ,078-000-033,071-000-460
• Condition: Refurbished with brand new HRL batteries
• Warranty: 1 (one) year Tekmart warranty

Key points to note on these 078-000-033 SPS batteries:-

• ::  This particular model with part numbers 100809008 / 078-000-033 / 071-000-460, is used by the EMC CX3-80.
• ::  This EMC SPS is a 2200W unit compatible with only the EMC CX3-80.
•  

All EMC SPS units sold by Tekmart Africa are fully refurbished with brand new battery cores and come with our industry standard 1 (one) year Tekmart warranty.

On these EMC CLARiiON CX3-80 Standby Power Supply (SPS) Replacement Battery 100809008 / 078-000-033 / 071-000-460::

As shown in Figure 1, the CX3-80 SPE uses two 2.2-kilowatt SPSs to maintain power to the storage system during a power loss; this allows a full dump of the write cache to a reserved area on the persistent disk. In the case of the CX3-80, SPS power output connectors are used to power the SPE as well as to power the first DAE on the first back-end loop.

Figure 1. View of CX3-80 Standby Power Supply (SPS)

It is important to cable each SPS so it connects completely to either the A side or the B side. For example, if you are looking at the SPS from the back, they should be configured as follows:

• ::  SPS on the right: Power-out and sense cables should connect to power supply A and SP A.
• ::  SPS on the left: Power-out and sense cables should connect to power supply B and SP B.

If an SPS is cabled with the SPS sense cable going to SP A and the power-out cable going to power supply B (or vice versa), error conditions are displayed when the SPS is tested while it is charging.