038-003-085 EMC Dell Micro DB9 to RJ12 SPS Serial Sense Cable

EMC Dell Micro DB9 to RJ12 SPS Serial Sense Cable Part #: 038-003-085

• Brand: EMC
• Part #: 038-003-085
• Specs:-
•  ::  Type: Micro DB9 to RJ12 SPS Serial Sense Cable
• Condition: Refurbished
• Warranty: 90-day 1 (one) year Tekmart warranty
•  

Key points to note on these 038-003-085 EMC Serial Sense Cables:-

Tekmart Africa is dedicated to providing top quality products to keep your EMC storage array running smoothly. This particular model with part number 038-003-085, is used by the EMC DX, AX, CX3 and CX4 series of arrays.

All EMC cables are used and fully tested, and come with a Tekmart warranty.

038-003-085 EMC Dell Micro DB9 to RJ12 SPS Serial Sense Cable

As shown in Figure 1, the 038-003-085 EMC SPS Sense cable is connected to the SPS unit via the RJ12 end, and to the SPE/DPE via the Micro DB9 connector. The DB9 connector can be 3-pin or 9-pin in layout under the same part number 038-003-085, and should work regardless of the pinout.

Figure 1. View of EMC SPS Sense Cable Connection/Installation 038-003-085

It is important to cable each SPS so it connects completely to either the A side or the B side. (See Figure 2 below) For example, if you are looking at the SPS from the back, they should be configured as follows:

• SPS on the right: Power-out and sense cables should connect to power supply A and SP A.
• SPS on the left: Power-out and sense cables should connect to power supply B and SP B (optional).

If an SPS is cabled with the SPS sense cable going to SP A and the power-out cable going to power supply B (or vice versa), error conditions are displayed when the SPS is tested while it is charging.

Figure 2. View of EMC SPS Sense Cables & Power Cables Connection/Installation 038-003-085