Dell PowerEdge R740-XD SFF-LFF NHS Middle Carrier Adapter DPN: 0TVJYN / TVJYN
- Brand: Dell
- Part #: 0TVJYN / TVJYN
- Specs:-
- ::Drive Interface: Supports SAS and SATA (HDD or SSD)
- ::Physical Dimensions: Approx. 13.4 cm (L) x 11.0 cm (W) x 2.8 cm (H)
- ::Drive Size Compatibility: 2.5" SFF drives (up to 15mm height)
- ::Mounting Orientation: Center/Mid-tray mounting:
- ::Screw Type: Uses M3 screws for the 2.5" drive; Torx T6/T8 for carrier mounting
- Compatibility:
- ::PowerEdge R740XD: Specifically used for the internal mid-drive tray (the tray located between the CPUs and the front bays).
- ::PowerEdge R7415 / R7425: Compatible with certain LFF internal configurations.
- ::Storage Enclosures: Also found in some MD3060 high-density storage arrays.
- Condition: New
- Warranty: 1 (one) year Tekmart Africa warranty
-
INT110526RTDK2026
**Eligible for immediate collection / shipping upon order confirmation*
The SKU: 0TVJYN (or TVJYN) is a specific Dell part used primarily in enterprise server setups. It is a 2.5-inch to 3.5-inch SFF (Small Form Factor) Center Hard Drive Tray Caddy.
They are most commonly associated with 14th Generation PowerEdge servers, particularly those with high-density storage configurations:
Unlike a standard drive sled that sits in the front bays of a server, this "center" caddy is designed for internal storage expansion inside the chassis.
Key Specifications
- Function: An adapter/caddy that allows you to mount a 2.5-inch SAS or SATA hard drive (or SSD) into a 3.5-inch bay slot.
- Primary Compatibility: It is specifically designed for the Dell PowerEdge R740XD.
- Other Compatible Systems: While it's built for the R740XD, it is often listed as compatible with other PowerEdge systems that use internal "mid-bay" drive configurations, such as the R320, R420, R520, R620, and R720.
Why you might need this:-
If you are upgrading an R740XD and want to add more SSDs or small laptop-sized hard drives into the middle bay (the tray that sits between the CPUs and the front fans), this is the bracket required to keep those smaller drives secure and properly aligned with the backplane connectors.
Installation Note:-
When installing a drive into the 0TVJYN, ensure you are using the correct side-mounting holes. Because it is a "Center" caddy, the drive sits in the middle of the 3.5-inch footprint to ensure the SAS/SATA connectors line up perfectly with the mid-bay backplane.
If the drive is slightly offset, it will not seat into the power/data pins.
English