LSI PCI Express to 6Gb/s Serial Attached SCSI (SAS) Host Bus Adapter Part #: SAS9201-16e
- Brand: LSI Logic
- Part #: SAS9201-16e,H3-25379-01F
- Specs:-
- :: Type: HBA
- :: Network Ports: SAS, Ethernet (RJ-45)
- :: Number of Ports: 16
- :: Connectors: 20+ 4 Pin
- :: Data Transfer Rate: 6Gbps
- :: Connector Type: SFF-8088
- :: Full Height Bracket
- :: Connect up to 512 SAS or SATA devices with 16 external 6Gb/s SAS and SATA ports
- Compatible Port:
- :: PCI
- :: PCI Express x8
- :: PCI Express x16
- Condition: New; open box
- Warranty: 1 (one) year Tekmart Africa warranty
-
INT210325SMSOS2025
**Eligible for immediate collection / shipping upon order confirmation*
Key points to note on these SAS9201-16e LSI / Avago HBA Adapters:-
The LSI® SAS 9201-16e PCI Express® (PCIe®)-to-Serial Attached SCSI (SAS) host bus adapter (HBA), hereinafter referred to as the LSI SAS 9201-16e HBA, provides high-performance external storage connectivity for servers and workstations.
This HBA provides sixteen lanes of 6Gb/s SAS connectivity and eight lanes of PCIe 2.0 5Gb/s performance. It is based on the Fusion-MPT™-architected LSI SAS 2116 controller that integrates the latest enhancements in PCIe 2.0 technology and 6Gb/s SAS technology. The HBA has onboard Flash memory for the firmware and BIOS, and onboard DDR-2 SDRAM.
This section lists the LSI SAS 9201-16e HBA features.
- :: Implements one LSI SAS 2116 sixteen-port 6Gb/s to PCIe 2.0 controller
- :: Supports eight-lane, full-duplex PCIe 2.0 performance
- :: Supports sixteen external 6Gb/s SATA+SAS ports
- :: Supports SAS link rates of 1.5Gb/s, 3.0Gb/s, and 6.0Gb/s
- :: Provides four x4 external mini-SAS connectors (SFF-8088)
- :: Supports DDR-2 speeds up to 800 MTps-(Supports active cable and passive cable)
- :: Supports up to 512 SATA or SAS end devices
- :: Provides one heartbeat LED and two activity LED headers
- :: Provides a universal asynchronous receiver/transmitter (UART) debug/diagnostic port
The LSI SAS 2116 controller chip contains the SATA + SAS functionality for the LSI SAS 9201-16e HBA. It has onboard Flash ROM for firmware and BIOS. The LSI SAS 9201-16e HBA provides one 4 M x 16-bit Flash ROM for storing the firmware and the BIOS.
Connectors:
PCIe Connector (EC1). The LSI SAS 9201-16e HBA supports a x8 interface. The PCIe connection is through the edge connector, EC1, which provides connections on both the top (EC1B) and bottom (EC1A) of the board. The signal definitions and pin numbers conform to the PCIe specification.
SAS Connectors (J6, J7, J8, and J9). The LSI SAS 9201-16e HBA supports SAS connections through four connectors which are SFF-8088 mini-SAS, external, right-angle connectors.
Activity LED Headers (J3 and J4). The LSI SAS 9201-16e HBA has two 4-pin, right-angle, 0.1-in. pitch headers for driving external activity LEDs. The LEDs on header J3 correspond to activity on Port C and Port D. Header J4 corresponds to activity on Port A and Port B.
English