2M SAS to SATA Cable SFF-8088 TO 4-SATA 7Pin Mini SAS 26P SFF-8088 TO 4-SATA 12Gbps Array Card Hard Disk Data Cable
- Brand: Generic
- Specs:-
- :: Wire Size (AWG): 28AWG
- Length: 2M
- :: Connector A = SFF-8088 (External Mini SAS)
- :: Connector B = 4 x eSATA (External SATA)
- :: Impedance: 100 Ohms
- :: Compliant to SAS-2 specifications
- :: ROHS complaint
- :: UL approved components.
- Condition: New
- Warranty: 1 (one) year Tekmart Africa warranty
-
Key points to note on these SFF 8088 MINI SAS to 4-SATA cable arrays:-
These are External Mini-SAS to 4 SATA copper patch cord that provide data rates of up to 6 Gbps(SATA) and is compliant to SAS 2.1 specifications. These external Mini-SAS to 4 SATA copper patch cord provides data rates of up to 6 Gbps(SATA) and is compliant to SAS 2.1 specifications. The SFF8088 Mini-SAS connector and SATA connector is a pull latching style.
SAS (Serial Attached SCSI) is a new generation of SCSI technology. It is the same as the popular Serial ATA (SATA) hard disk. It uses serial technology to obtain better transmission speed and shorten the connection cable. Improve internal space, etc. SAS is a new interface developed after the parallel SCSI interface.
This interface is designed to improve the performance, availability, and expandability of the storage system, and to provide compatibility with SATA hard drives.
SAS interface technology can be backward compatible with SATA. Specifically, the compatibility of the two is mainly reflected in the compatibility of the physical layer and the protocol layer.
At the physical layer, the SAS interface and the SATA interface are fully compatible. SATA hard disks can be used directly in the SAS environment. From the interface standard, SATA is a sub-standard of SAS.
Therefore, the SAS controller can directly control SATA hard disks. However, it cannot be used directly in the SATA environment, because the SATA controller cannot control the SAS hard disk; at the protocol layer, SAS is composed of three types of protocols, and the corresponding protocol is used for data transmission according to different connected devices.
Among them, the serial SCSI protocol (SSP) is used to transmit SCSI commands; the SCSI management protocol (SMP) is used to maintain and manage connected devices; and the SATA channel protocol (STP) is used to transfer data between SAS and SATA.
Therefore, under the cooperation of these three protocols, SAS can seamlessly integrate with SATA and some SCSI devices.
**Eligible for immediate collection / shipping upon order confirmation**
English